Iei-integration AFL-07A 08AH 10A 12A-LX Series Manual de usuario descargar pdf (Pagina 70)

FOLUX LX Series Flat Panel PC

Page 56

4.4 Memory Module Replacement

The flat panel PC is preinstalled with a 256MB/512MB DDR memory module. If the

memory module is fail, follow the instructions below to replace the memory module.

Step 1: Remove the back cover. See Section

3.5 above.

Step 2: Remove the internal aluminum back cover. See Section

4.3 above.

Step 3: Locate the DDR memory module on the motherboard of the flat panel PC

(

Figure 4-12).

Figure 4-12: SO-DIMM Socket Location

Step 4: Remove the DDR memory module by pulling both the spring retainer clips

outward from the socket.

Step 5: Grasp the DDR memory module by the edges and carefully pull it out of the

socket.

Step 6: Install the new DDR memory module by pushing it into the socket at an angle

(

Figure 4-13).

Step 7: Gently pull the spring retainer clips of the SO-DIMM socket out and push the

rear of the DDR memory module down (

Figure 4-13).

Step 8: Release the spring retainer clips on the SO-DIMM socket. They clip into place

and secure the DDR memory module in the socket.Step 0:

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 130 131

Sin comentarios

Iei-integration AFL-07A 08AH 10A 12A-LX Series Manual de usuario Pagina 70