Iei-integration IMBA-G412ISA v2.00 Manual de usuario descargar pdf (Pagina 60)

461/20/2012164

Page 46

IMBA-G412ISA ATX Motherboard

Step 3: Inspect the CPU socket. Make sure there are no bent pins and make sure the

socket contacts are free of foreign material. If any debris is found, remove it with

compressed air.

Step 4: Orientate the CPU properly. The contact array should be facing the CPU

socket.

Step 5: Correctly position the CPU. Match the Pin 1 mark with the cut edge on the

CPU socket.

Step 6: Align the CPU pins. Locate pin 1 and the two orientation notches on the CPU.

Carefully match the two orientation notches on the CPU with the socket

alignment keys.

Step 7: Insert the CPU. Gently insert the CPU into the socket. If the CPU pins are

properly aligned, the CPU should slide into the CPU socket smoothly.

See Figure 4-4.

Figure 4-4: Insert the Socket LGA775 CPU

Step 8: Close the CPU socket. Close the load plate and engage the load lever by

pushing it back to its original position. There will be some resistance, but will not

require extreme pressure.

Step 9: Connect the 12 V power to the board. Connect the 12 V power from the power

supply to the board. Step 0:

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 163 164

Sin comentarios

Iei-integration IMBA-G412ISA v2.00 Manual de usuario Pagina 60