Iei-integration EC-1040G Manual de usuario descargar pdf (Pagina 35)

EC-1040GB Workstation

Page 25

Step 8: Install the PCI or ISA expansion cards (optional).

Step 9: Connect all required cables.

Step 10: Reinstall the CPU card clamp.

Step 11: Close the top cover.

Step 12: Install the keyboard (optional).

Step 13: Mount the workstation.Step 0:

4.5 Installing Components into the EC-1040GB

NOTE:

This section gives a generic description of the component installation process

for the EC-1040GB rackmount workstation.

WARNING:

Failure to follow the installation procedures outlined in this section may cause

severe damage to the EC-1040GB rackmount workstation. Please follow the

installation instructions carefully.

4.5.1 Remove the Top Cover

The top cover is secured to the EC-1040GB rackmount workstation with six screws (three

each on the left and right panels). To remove the top cover, please follow the steps below.

Step 1: Remove the six top cover retention screws (three each on the left and right

panels). (See Figure 4-1)

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 84 85

Sin comentarios

Iei-integration EC-1040G Manual de usuario Pagina 35