Iei-integration PCIE-G41A2 Manual de usuario descargar pdf (Pagina 60)

PCIE-G41A2 PICMG 1.3 CPU card

Page 48

Step 3: Insert the cable connectors. Once the cable connectors are properly aligned

with the USB connectors on the PCIE-G41A2, connect the cable connectors to

the on-board connectors. See

Figure 4-12.

Figure 4-12: Dual USB Cable Connection

Step 4: Attach the bracket to the chassis. The USB 2.0 connectors are attached to a

bracket. To secure the bracket to the chassis please refer to the installation

instructions that came with the chassis.Step 0:

4.5 External Peripheral Interface Connection

This section describes connecting devices to the external connectors on the PCIE-G41A2.

4.5.1 LAN Connection

There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection

to an external network. To connect a LAN cable with an RJ-45 connector, please follow

the instructions below.

Step 1: Locate the RJ-45 connectors. The locations of the USB connectors are shown

in Chapter 4.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 150 151

Sin comentarios

Iei-integration PCIE-G41A2 Manual de usuario Pagina 60