Iei-integration PCIE-Q57A Manual de usuario descargar pdf (Pagina 50)

PCIE-Q57A PICMG 1.3 CPU Card

Page 38

Step 4: Orientate the CPU properly. The contact array should be facing the CPU

socket.

Step 5: Correctly position the CPU. Match the Pin 1 mark with the cut edge on the

CPU socket.

Step 6: Align the CPU pins. Locate pin 1 and the two orientation notches on the CPU.

Carefully match the two orientation notches on the CPU with the socket

alignment keys.

Step 7: Insert the CPU. Gently insert the CPU into the socket. If the CPU pins are

properly aligned, the CPU should slide into the CPU socket smoothly. See

Figure 4-3.

Figure 4-3: Insert the Socket LGA1156 CPU

Step 8: Close the CPU socket. Close the load plate and pull the load lever back a little

to have the load plate be able to secure to the knob. Engage the load lever by

pushing it back to its original position (

Figure 4-4). There will be some

resistance, but will not require extreme pressure.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 158 159

Sin comentarios

Iei-integration PCIE-Q57A Manual de usuario Pagina 50