Iei-integration RPC-6106_6108 Manual de usuario descargar pdf (Pagina 40)

RPC-6106/6108 Rackmount LCD Workstation

Figure 4-7: Install the CPU Card

Step 3: To secure the CPU card, reinsert the previously removed slot cover retention

screw.Step 0:

4.5.7 Install the PCI/ISA Expansion Card

To install a PCI expansion card or an ISA expansion card please follow the instructions

below.

Step 1: Remove the slot cover retention screw to remove the slot bracket from the

chassis rear panel (

Figure 4-6).

Step 2: Slide the PCI/ISA expansion card into the reserved PCI/ISA socket on the

backplane.

Step 3: To secure the PCI/ISA expansion card, reinsert the previously removed slot

cover retention screw and reinstall the card bracket. Step 0:

4.5.8 Connect the Cables

The following cables may have to be connected depending on the CPU board and the

backplane installed in the system:

 VGA cable

Page 30

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 84 85

Sin comentarios

Iei-integration RPC-6106_6108 Manual de usuario Pagina 40