Iei-integration RPC-6106_6108 Manual de usuario descargar pdf (Pagina 51)

RPC-6106/6108 Rackmount LCD Workstation

5.2 CPU Card Replacement

To replace a CPU card, please follow the instructions below.

Step 1: Turn off and disconnect the workstation from all power sources.

Step 2: Remove the workstation from the rack in which it is installed.

Step 3: Open the top cover of the RPC-6106/6108 Rackmount LCD Workstation. (See

Section

4.5.1)

Step 4: Disconnect all internal and external peripheral device connections from the CPU

card.

Step 5: Remove the retention screw that secures the CPU card to the slot on the front

panel.

Step 6: Slide the CPU card out of the workstation. Make sure the back edge of the CPU

card slides into the guide rails on the chassis.

Step 7: Install a new CPU card. (See Section

4.5.6)

Step 8: Insert the slot retention screw that was removed earlier.

Step 9: Reinstall the top cover of the workstation. (See Section

4.5.9)

Step 10: Reinstall the workstation into the rack. Refer to Section

4.6 for complete

mounting instructions.Step 0:

5.3 PCI/ISA Expansion Card Replacement

To replace a PCI/ISA expansion card, please follow the instructions below.

Step 1: Turn off and disconnect the workstation from all power sources.

Step 2: Remove the workstation from the rack in which it is installed.

Step 3: Open the top cover of the RPC-6106/6108 Rackmount LCD Workstation. (See

Section

4.5.1)

Page 41

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 84 85

Sin comentarios

Iei-integration RPC-6106_6108 Manual de usuario Pagina 51