Iei-integration RPC-6106_6108 Manual de usuario descargar pdf (Pagina 52)

RPC-6106/6108 Rackmount LCD Workstation

Step 4: Disconnect all internal and external peripheral device connections from the

PCI/ISA expansion card.

Step 5: Remove the retention screw that secures the CPU card to the slot on the rear

panel.

Step 6: Slide the expansion card out of the workstation.

Step 7: Install a new expansion card. (See Section

4.5.7)

Step 8: Insert the slot retention screw that was removed earlier.

Step 9: Reinstall the top cover of the workstation. (See Section

4.5.9)

Step 10: Reinstall the workstation into the rack. Refer to Section

4.6 for complete

mounting instructions.Step 0:

5.4 Backplane Replacement

To replace a backplane, please follow the instructions below.

Step 1: Turn off and disconnect the workstation from all power sources.

Step 2: Remove the workstation from the rack in which it is installed.

Step 3: Open the top cover of the RPC-6106/6108 Rackmount LCD Workstation. (See

Section

4.5.1)

Step 4: Disconnect and remove all CPU cards (see Section

5.2) and PCI/ISA expansion

cards (see Section

4.5.7).

Step 5: Remove the retention screws that secure the backplane to the workstation (see

Section

4.5.5).

Step 6: Remove the backplane from the chassis

Step 7: Install a new backplane into the chassis.

Step 8: Reinstall and reconnect all CPU cards (see Section

4.5.6) and PCI/ISA

expansion cards (see Section

4.5.7).

Page 42

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 84 85

Sin comentarios

Iei-integration RPC-6106_6108 Manual de usuario Pagina 52