Iei-integration IMBA-C2160 Manual de usuario descargar pdf (Pagina 86)

IMBA-C2160 ATX Motherboard

Page 70

Figure 4-19: VGA Connection

Step 6: Secure the connector. Secure the DB-15 VGA connector from the VGA

monitor to the external interface by tightening the two retention screws on either

side of the connector. Step 0:

4.6 Intel

AMT Setup Procedure

The IMBA-C2160 is featured with the Intel® Active Management Technology (AMT). To

enable the Intel® AMT function, follow the steps below.

Step 1: Make sure the DIMM socket is installed with one DDR3 memory.

Step 2: Connect an Ethernet cable to the RJ-45 connector labeled LAN2.

Step 3: The UEFI BIOS options regarding the Intel® ME or Intel® AMT must be enabled.

Step 4: Properly install the Intel® Management Engine Components drivers from the

iAMT Driver & Utility directory in the driver CD. See Section

6.9.

Step 5: Configure the Intel® Management Engine BIOS extension (MEBx). To get into

the Intel® MEBx settings, press <Ctrl+P> after a single beep during boot-up

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 216 217

Sin comentarios

Iei-integration IMBA-C2160 Manual de usuario Pagina 86