Iei-integration NANO-LX v1.21 Manual de usuario descargar pdf (Pagina 98)

NANO-LX EPIC SBC

Page 83

Step 3: Connect Power Cable to Power Supply. Connect one of the 4-pin (1x4) Molex

type power cable connectors to an AT power supply. See

Figure 5-7. Step 0:

Figure 5-7: Connect Power Cable to Power Supply

5.8.4 Audio Kit Installation

The Audio Kit that came with the NANO-LX connects to the audio connector on the

NANO-LX. The audio kit consists of three audio jacks. Mic-in connects to a microphone.

Line-in provides a stereo line-level input to connect to the output of an audio device.

Line-out, a stereo line-level output, connects to two amplified speakers. To install the

audio kit, please refer to the steps below:

Step 1: Locate the audio connector. The location of the 10-pin audio connector is

shown in Chapter 3.

Step 2: Align pin 1. Align pin 1 on the on-board connector with pin 1 on the audio kit

connector. Pin 1 on the audio kit connector is indicated with a white dot. See

Figure 5-8.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 191 192

Sin comentarios

Iei-integration NANO-LX v1.21 Manual de usuario Pagina 98