Iei-integration PM-LX2-800 Manual de usuario descargar pdf (Pagina 62)

PM-LX2-800 User Manual

Page 62

Step 4: Attach PS/2 connectors to the chassis. The keyboard/mouse Y-cable

connector is connected to two PS/2 connectors. To secure the PS/2 connectors

to the chassis please refer to the installation instructions that came with the

chassis.

Step 5: Connect the keyboard and mouse. Once the PS/2 connectors are connected

to the chassis, a keyboard and mouse can each be connected to one of the

PS/2 connectors. The keyboard PS/2 connector and mouse PS/2 connector are

both marked. Please make sure the keyboard and mouse are connected to the

correct PS/2 connector. Step 0:

4.8.3 Parallel Port Cable without Bracket

The optional parallel port (LPT) cable respectively connects the onboard LPT 26-pin box

header to an external LPT device (like a printer). The cable comprises a 26-pin female

header, to be connected to the onboard LPT box-header, on one side and on the other

side a standard external LPT connector. To connect the LPT cable, please follow the

steps below.

Step 1: Locate the connector. The LPT connector location is shown in Section

3.1.1.

Step 2: Align the connectors. Correctly align pin 1 on the cable connector with pin 1 on

the PCIE-9452 LPT box-header connector. See

Figure 4-6.

Step 3: Insert the cable connectors. Once the cable connector is properly aligned with

the 26-pin box-header connector on the PCIE-9452, connect the cable

connector to the onboard connector. See

Figure 4-6.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 122 123

Sin comentarios

Iei-integration PM-LX2-800 Manual de usuario Pagina 62